Enamel Pin Display Stand, heart set of 2 – 3D Print

9,0011,00

VAT exempt acc. §19 UstG, plus shipping.


DESCRIPTION:
A new way of displaying your pins for decoration, or use it as a helping item to arrange your pins for photoshoots!
It comes in 2 sizes and various colours to fit your needs. You can use the pin display stand as is, or use a glue stick to place your own image on the display and personalise it. (example for that can be seen on the heart with the red dotted paper)
You will get a set of 2 sizes. Big is sized 3.5″/ 9cm. Medium: 2.1″/6,5cm.
I have used rubber and butterfly clutch backings without a problem. Most of the times one single butterfly clutch is enough to snuggly fit a pin on, which is really helpful.

I offer two versions of “grates”: Grid and Gyro.
Both the grid and gyro options may require some wiggling and compromising, as centring your pins depends on the actual placement of the posts on your pins. The gyro grate is less rigid than the grid and has a bit of flex to it as it is printed thinner.

★ You will get a set of two, one of each size: big and medium.
★ I print these with my own desktop 3D printer, meaning the FDM print technique leaves layers visible by eye and touch.
★ Colours may vary between your monitor’s colour settings and the physical product.
★ Material/Filament used: PLA, produced in Germany or Europe. Heat resistant up to 60 °C/150 °F.
★ Does not come with the pins or decoration used for the photoshoot.

Clear
SKU: PDS-H Category: Tags: ,